This is an old revision of the document!

LED Codes and Status

Powering up your Twiddler for the first time will light up 3 LEDs (Red, Green, and Blue).
The LEDs indicate many modes and status of the Twiddler.

LED Status	Action/Indicator	Chord
Red is on	Charging
3 Reds blinking	Charging complete
Red blinking every 4 seconds	Twiddler low on battery
Blue is blinking	Bluetooth scanning for device
Green is blinking	Battery critically low
Green 1 short blink	Bootloader mode	T14 Touchpad Click
Solid White	Sleep mode	T14F3L
Blue is blinking	Wakeup	Touchpad Click
Single Solid Green	Cycle Mouse Mode	T14F0R
RGB, Flash one White	Erase all Bluetooth Pairs	T14F1R
Solid White: Position 1-Num, 2-Caps, 3-Scroll	Display Keyboard Lock Status	T14F0M
Solid Green for cfg 1 to 3, (all Green LED on for Default Config)	Cycle between Twiddler.cfg files	T14F1M
Solid Green for host 1 to 3, (all Green LED on for <look up>)	Cycle between wireless hosts	T14F2M
Solid Red, 1 Low, 2 Med, 3 Full	Display Battery Status	T14F0L
Solid RGB	Erase Re-Chorded Data Files	T14F1L

Twiddler