This is an old revision of the document!

LED Codes and Status

Powering up your Twiddler for the first time will light up 3 LEDs (Red, Green, and Blue).
The LEDs indicate many modes and status of the Twiddler.

Colour	Status	Indicator
Red	On	Charging
	All 3 LED are blinking	Charging complete
	1 LED is blinking every 4 seconds	Twiddler is low on battery
Blue	1 LED is blinking	Bluetooth scanning for device
Green	1 LED is blinking	Twiddler’s battery is critically low and is time to charge your device
	On	Selecting Config files 1-3
	All 3 are on	Default config is selected
	1 short blink	Bootloader mode
White	1 LED blinks once	Twiddler is on Sleep Mode

Chord	Action	LED
Touchpad Click	Wakeup	Blink Blue
T14 Touchpad Click	Enter Bootloader Mode	Blink Green
T14F0R	Cycle Mouse Mode	Single Solid Green
T14F1R	Erase all Bluetooth Pairs	RGB, Flash one White
T14F0M	Display Keyboard Lock Status	Solid White: Position 1-Num, 2-Caps, 3-Scroll
T14F1M	Cycle active Twiddler.cfg file	Solid Green for cfg 1-3, all on for Default Config
T14F2M	Cycle between wireless hosts	Solid Green for host 1-3, all on for <look up>
T14F0L	Display Battery Status	Solid Red, 1 Low, 2 Med, 3 Full
T14F1L	Erase Re-Chorded Data Files	Solid RGB
T14F3L	Sleep	Solid White

Twiddler