Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
This is an old revision of the document!
There is 175k of non-volatile file storage available on the Twiddler. It is accessible only when the Twiddler is connected to your computer via USB. It should mount as a FAT formatted Removable Hard Drive. Both the Twiddler Config (4 x *.cfg) and Re-Chorded log (4 x *.log) files are stored on the root of this drive.
There are four (4) Twiddler Config files stored on the Twiddler 4
File Name | Purpose |
---|---|
0.cfg | Reserved - Default Config |
1.cfg | 1st custom config slot |
2.cfg | 2nd custom config slot |
3.cfg | 3rd custom config slot |
There are four (4) Twiddler Re-Chorded log files stored on the Twiddler 4
File Name | Purpose |
---|---|
0.log | 1st custom config slot |
1.log | 2nd custom config slot |
2.log | 3rd custom config slot |
3.log | 4th custom config slot |
All log files can be selected and written to when in Re-Chorded mode. Just keep in mind that there is a hard 64K limit on the size of each log file.
There are times that you may wish to reformat the Twiddler's flash disk. This procedure is safe and will not affect the firmware on the Twiddler. Just remember to backup the data on the drive as formatting it will wipe it clean.
The drive must be FAT Formatted.