Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
This is an old revision of the document!
There is 175k of non-volatile file storage available on the Twiddler. It is accessible only when the Twiddler is connected to your computer via USB. It should mount as a FAT formatted Removable Hard Drive. Both the Twiddler Config (4 x *.cfg) and Re-Chorded log (4 x *.log) files are stored on the root of this drive.
There are four (4) Twiddler Config files stored on the Twiddler 4
File Name | Purpose |
---|---|
0.cfg | Reserved - Default Config |
1.cfg | 1st custom config slot |
2.cfg | 2nd custom config slot |
3.cfg | 3rd custom config slot |
When you create custom configs, copy them to the Twiddler. Do not overwrite 0.cfg as it is reserved for the factory default config and will be overwritten by the Twiddler.
There are times that you may wish to reformat the Twiddler's flash disk. This procedure is safe and will not affect the firmware on the Twiddler. Just remember to backup the data on the drive as formatting it will wipe it clean.
The drive must be FAT Formatted.