Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
Using the Twiddler 4
Using the Twiddler 3
Twiddler Tuner
Typing Tutor
Twiddler Technical
Twiddler Legacy Instructions
This is an old revision of the document!
The LED on the back of the Twiddler indicates the many modes of the Twiddler:
Orange - Charging in progress; power switch ON; plugged into USB power.
Red - Charging in progress; power switch OFF; plugged into USB power.
Green - Charging is complete; power switch ON; plugged into USB power.
Off - Charging is complete; power switch OFF; plugged into USB power.
Very dim Red - Battery issue. Contact support.
1 long blink on power up - power up OK.
1 short blink on power up - battery empty.
1 short blink every 4 seconds - battery life limited, < 1% charge remaining.
Green - Bluetooth actively scanning for host; power switch ON, no USB connected.
OFF - Bluetooth connected, power switch ON, no USB connected.
2 short blinks every one second, ready to pair with a Bluetooth Host.
1 long blink, waking up from sleep mode and pairing with Bluetooth Host.
N+S R000 Resets the Bluetooth Pair in the Twiddler3.