Config Files Listing Page

Once you log in you will be brought to the Config Files Listing Page.

There are two listing areas here:

• New Config File
• My Config Files

In this section you can create new config files for your Twiddler.

There is a pull down menu with three types of actions you can perform to create a config file:

• Upload - upload a config file that you have received from someone else
• Twiddler 4 - select this if Twiddler 4 is your current device
• Twiddler 3 - select this if Twiddler 3 is your current device

When you hover on Twiddler 4 or 3, you will see these two options:

• Default - start with a factory default V6, V5, or V4 config
• Empty - V6, V5 or V4 config - no chord assignments, all button assignments are empty

Once you have selected an action, you will see a new entry appear at the bottom of the My Config Files table. Your new file will be prefixed the action you selected and then a time stamp. Click on the name of the config file to Edit your config.

Config versions change to accommodate new functionality and features built into the firmware. Please check this table to see which Config Version you should be selecting: Twiddler Firmware Table

When you create or import config files they will be listed in the table.

Each config file should have a descriptive name so that you can know, at a glance, what the configuration file represents.

There is 1 icon to the right, and 2 icons to the left of each config row. Clicking on one of them allows you to perform an action on the config file:

Download your config to your computer or Twiddler

IMPORTANT: After copying the config file to the Twiddler, the USB cable must be disconnected so the Twiddler can commit the file to its non-volatile (permanent) storage.

Duplicate your config

Delete your config

Click on the File Name to Edit Your Config.