====== LED Codes and Status ======

Powering up your Twiddler for the first time will light up 3 LEDs (Red, Green, and Blue).\\ 
The LEDs indicate many modes and status of the Twiddler.\\
{{https://tgimages.s3.amazonaws.com/twiddler/wiki/TW4_NoLights.jpg|LED are off }}
{{https://tgimages.s3.amazonaws.com/twiddler/wiki/TW4_RGB.jpg|LED are on }}

==== LED Status Indicators ====

^ LED Status ^ Action/Indicator ^ Chord ^
| Solid Red, Green, Blue | Wakeup | Touchpad Click (T0) |
| Red is on | Charging | |
| 3 Reds blinking | Charging complete | |
| Red blinking every 4 seconds | Twiddler low on battery | |
| Blue L>M>R>M>L Animation | Bluetooth scanning for device | |
| Green Left fast constant blink | Bootloader mode - USB Disconnected | T014 |
| Green Left slow constant blink | Bootloader mode - USB Connected | T014 |
| 3 Greens blinking | Updating Firmware | |
| All Magenta | Sleep mode | T023 |
| Single Solid Yellow | Cycle Mouse Mode | T0F4L |
| Blue LED, Scanning animation | Erase all Bluetooth Pairs | T14F4R |
| Solid White: Position 1-Num, 2-Caps, 3-Scroll | Display Keyboard Lock Status | T0F1L |
| Single Solid Green for 1 to 3.cfg, (all Green LED on for Default Config) | Cycle between config files | T0F4M |
| Solid Blue for host 1 to 3, (Scanning Blue LED on for Automatic Mode) | Cycle between wireless hosts | T0F4R|
| Solid Red, 1 Low, 2 Med, 3 Full | Display Battery Level | T0F1M |
| Rapid Red flashing, Any LED rapidly blinking | Error - see Error Codes | |