===== Powering up and pairing the Twiddler via Bluetooth for the first time ===== 
To wirelessly connect your Twiddler to your device:

  - Press the touchpad to activate the Twiddler
  - 3 LED lights (RGB) should light up then a single Blue LED should be flashing.  
  - {{ https://tgimages.s3.amazonaws.com/twiddler/wiki/pairinglights.jpg }}
  - On your Host's Bluetooth device list, you should see Twiddler 4. 
  - {{ https://tgimages.s3.amazonaws.com/twiddler/wiki/bluetoothSettings.jpg }}
  - Select it to connect and you’re good to go!

The Twiddler is easily woken up by pressing the touchpad and it will last for months in the stand by mode.

**NOTE:** The Twiddler 4 does not have an on/off switch.  The Twiddler 4 will automatically power down when not in use for a period of time.  This timeout can be customized by changing the [[tuner_edit|Idle Time until Sleep in Twiddler Tuner]].

Twiddler 4 uses USB-C to charge (a **USB-A to USB-C cable** is not included).
//You can use the Twiddler and charge it at the same time when the Twiddler is connected to your device via USB.//