User Tools

Site Tools


troubleshooting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
troubleshooting [2025/01/24 17:08] tonytroubleshooting [2025/01/24 17:11] (current) – [Config Files] tony
Line 23: Line 23:
 ====Config Files==== ====Config Files====
    - **Problem**: Copy Config file to Twiddler but it is not being used. \\ **Solution 1** : After copying, disconnect the USB cable from the Twiddler to commit the copy to the Twiddler's storage. \\ **Solution 2** : check that the config version is compatible with the Twiddler firmware version. [[https://www.mytwiddler.com/doc/doku.php?id=twiddler_firmware|https://www.mytwiddler.com/doc/doku.php?id=twiddler_firmware    - **Problem**: Copy Config file to Twiddler but it is not being used. \\ **Solution 1** : After copying, disconnect the USB cable from the Twiddler to commit the copy to the Twiddler's storage. \\ **Solution 2** : check that the config version is compatible with the Twiddler firmware version. [[https://www.mytwiddler.com/doc/doku.php?id=twiddler_firmware|https://www.mytwiddler.com/doc/doku.php?id=twiddler_firmware
-]]+]] \\ **Solution 3** : re-download file from Tuner. The Twiddler will ignore any config file that is corrupted and/or does not pass its initial validation check.  3 green LEDs will light up when changing config slots indicating that the Twiddler is using the built in default config.
troubleshooting.1737738537.txt.gz · Last modified: 2025/01/24 17:08 by tony