Differences

This shows you the differences between two versions of the page.

--- troubleshooting [2024/08/07 18:05] – [Power] tony
+++ troubleshooting [2025/01/24 17:11] (current) – [Config Files] tony
@@ Line 20: / Line 20: @@
    - **Problem**: USB Drive mounts but is inaccessible. \\ **Solution 1** : Reformat the USB Drive.  Format in FAT with an allocation unit size of 512. (These are standard for FAT Formatting) \\
+====Config Files====
+   - **Problem**: Copy Config file to Twiddler but it is not being used. \\ **Solution 1** : After copying, disconnect the USB cable from the Twiddler to commit the copy to the Twiddler's storage. \\ **Solution 2** : check that the config version is compatible with the Twiddler firmware version. [[https://www.mytwiddler.com/doc/doku.php?id=twiddler_firmware|https://www.mytwiddler.com/doc/doku.php?id=twiddler_firmware
+]] \\ **Solution 3** : re-download file from Tuner. The Twiddler will ignore any config file that is corrupted and/or does not pass its initial validation check.  3 green LEDs will light up when changing config slots indicating that the Twiddler is using the built in default config.

Twiddler