User Tools

Site Tools


t4_led

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
t4_led [2024/05/08 17:51] tonyt4_led [2024/10/25 19:08] (current) – [LED Status Indicators] tony
Line 8: Line 8:
 ==== LED Status Indicators ==== ==== LED Status Indicators ====
  
-=== No input from user === +LED Status ^ Action/Indicator ^ Chord 
- +Solid Red, Green, Blue Wakeup | Touchpad Click (T0) | 
-^ Colour ^ Status ^ Indicator ^ +| Red is on | Charging 
-|Red|On|Charging| +| 3 Reds blinking | Charging complete 
-:::|All LED are blinking|Charging complete| +Red blinking every 4 seconds | Twiddler low on battery 
-:::|1 LED is blinking every 4 seconds|Twiddler is low on battery| +| Blue L>M>R>M>L Animation | Bluetooth scanning for device 
-|Blue|1 LED is blinking|Bluetooth scanning for device| +| Green Left fast constant blink Bootloader mode USB Disconnected T014 
-|Green|1 LED is blinking|Twiddler’s battery is critically low and is time to charge your device| +Green Left slow constant blink | Bootloader mode - USB Connected T014 
-| :::| On |Selecting Config files 1-3| +3 Greens blinking Updating Firmware | | 
-| :::| All 3 are on| Default config is selected+All Magenta Sleep mode T023 
-:::| 1 short blink|Bootloader mode| +Single Solid Yellow | Cycle Mouse Mode | T0F4L 
-|White|1 LED blinks once|Twiddler is on Sleep Mode| +Blue LED, Scanning animation | Erase all Bluetooth Pairs | T14F4R 
- +| Solid White: Position 1-Num, 2-Caps, 3-Scroll | Display Keyboard Lock Status T0F1L | 
-=== User input === +Single Solid Green for 1 to 3.cfg(all Green LED on for Default Config| Cycle between config files | T0F4M | 
- +| Solid Blue for host 1 to 3, (Scanning Blue LED on for Automatic Mode) Cycle between wireless hosts T0F4R| 
-^ Chord ^ Action ^ LED ^ +| Solid Red, 1 Low, 2 Med, 3 Full | Display Battery Level T0F1M 
-Touchpad Click WakeupBlink Blue+Rapid Red flashing, Any LED rapidly blinking Error - see Error Codes | |
-T14 Touchpad Click Enter Bootloader Mode Blink Green+
-T14F0R | Cycle Mouse Mode | Single Solid Green+
-T14F1R | Erase all Bluetooth Pairs| RGB, Flash one White+
-| T14F0M | Display Keyboard Lock Status| Solid White: Position 1-Num, 2-Caps, 3-Scroll| +
-T14F1M Cycle active Twiddler.cfg file| Solid Green for cfg 1-3, all on for Default Config+
-| T14F2M | Cycle between wireless hosts| Solid Green for host 1-3, all on for <look up>| +
-T14F0L Display Battery Status|Solid Red, 1 Low, 2 Med, 3 Full| +
-T14F1L | Erase Re-Chorded Data Files| Solid RGB+
-T14F3L SleepSolid White|+
  
  
t4_led.1715190712.txt.gz · Last modified: 2024/05/08 17:51 by tony