Differences

This shows you the differences between two versions of the page.

--- t4_firmwareupgrade [2024/09/11 18:47] – [Preparing for the Upgrade] tony
+++ t4_firmwareupgrade [2024/12/27 19:39] (current) – [Complete the Upgrade] tony
@@ Line 17: / Line 17: @@
 ====Complete the Upgrade====
-  - Once programming is complete, Press [[t4_specialchords|T14F4R]] to Erase Bluetooth Pairs. This is an important step. You will need to re-pair Bluetooth Hosts again.
+  - Confirm the new firmware is running by opening a notepad on the host device and pressing [[t4_specialchords|T0F1R]] on the Twiddler. The firmware version will be shown after the “ver=”.
-  - Confirm the new firmware is running by opening a notepad on the host device and pressing [[t4_specialchords|T0F1R]] on the Twiddler. The firmware version will be shown after the “ver=”
+  - A quick troubleshooting tip, if you are getting a driver error on your host device after the upgrade,{{ https://tgimages.s3.amazonaws.com/twiddler/wiki/T4_BTDriverError.png }} press [[t4_specialchords|T14F4R]] to Erase Bluetooth Pairs. You will need to re-pair Bluetooth Hosts again.
+====Video: Upgrading your Twiddler 4 Firmware====
+{{ youtube>AVPWZsVdf9Q? }}

Twiddler