Differences

This shows you the differences between two versions of the page.

--- t4_firmwareupgrade [2024/09/10 20:27] – [Complete the Upgrade] tony
+++ t4_firmwareupgrade [2024/12/27 19:39] (current) – [Complete the Upgrade] tony
@@ Line 1: / Line 1: @@
-=====Upgrading Twiddler 4 Firmware=====
+=====Upgrading Firmware - Twiddler 4=====
-Here are the steps to upgrade your firmware:
+Here are the steps to upgrade your Twiddler 4 firmware:
 ====Preparing for the Upgrade====
-  - Plug the Twiddler 4 into USB.
+  - Identify which firmware you are running by opening a Notepad app on the host device and pressing [[t4_specialchords|T0F1R]] on the Twiddler. The firmware version will be shown after the "ver=". If you are running an earlier version of the firmware, proceed to the next steps.
-  - Identify which firmware you are running by opening a notepad on the host device and pressing [[t4_specialchords|T0F1R]] on the Twiddler. The firmware version will be shown after the "ver="
-  - Put the Twiddler to Sleep by pressing [[t4_specialchords|T023]]
   - Download and unzip the latest firmware here: [[twiddler_firmware|Twiddler Firmware]]
   - Rename the bin file to Twiddler.bin
+  - Put the Twiddler to Sleep by pressing [[t4_specialchords|T023]]
 ====Begin the Upgrade====
   - Enter [[T4_specialchords|Bootloader Mode]]. (T014 Touchpad Click)
+  - Plug the Twiddler 4 into USB.
   - Copy Twiddler.bin to the Twiddler.
   - Unplug the USB Cable.
-  - Wait until programming is complete.
+  - Green light will be rapidly blinking while programming. Wait until programming is complete.
 ====Complete the Upgrade====
-  - Once programming is complete, Press [[t4_specialchords|T14F4R]] to Erase Bluetooth Pairs. This is an important step. You will need to re-pair Bluetooth Hosts again.
+  - Confirm the new firmware is running by opening a notepad on the host device and pressing [[t4_specialchords|T0F1R]] on the Twiddler. The firmware version will be shown after the “ver=”.
-  - Confirm the new firmware is running by opening a notepad on the host device and pressing [[t4_specialchords|T0F1R]] on the Twiddler. The firmware version will be shown after the “ver=”
+  - A quick troubleshooting tip, if you are getting a driver error on your host device after the upgrade,{{ https://tgimages.s3.amazonaws.com/twiddler/wiki/T4_BTDriverError.png }} press [[t4_specialchords|T14F4R]] to Erase Bluetooth Pairs. You will need to re-pair Bluetooth Hosts again.
+====Video: Upgrading your Twiddler 4 Firmware====
+{{ youtube>AVPWZsVdf9Q? }}

Twiddler

User Tools

Site Tools

Differences

Page Tools