Twiddler

User Tools

Site Tools

Trace: • firmwareupgrade
t4_bluetooth

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
t4_bluetooth [2025/05/26 17:32] – tonyt4_bluetooth [2025/05/26 17:38] (current) – tony
Line 19: Line 19:
 When all three LEDs are blinking Blue at the same time, the Twiddler is actively looking for a host to pair with. Use this mode to add new hosts to the Twiddler. When all three LEDs are blinking Blue at the same time, the Twiddler is actively looking for a host to pair with. Use this mode to add new hosts to the Twiddler.
  
-==Wildcard (B-B/A-B/A)==+==Automatic Discovery Mode(B-B/A-B/A)==
  
-If at least one of the LEDs is Aqua (light blue), the Twiddler is in Wildcard mode.  This mode will only seek to pair with known hosts.  The number of known hosts are represented by Blue LEDs and empty pair slots are represented by Aqua LEDs.  All three LEDs will illuminate then cycle left to right, then right to left indicating that it is searching for a match. Once a match is found, the corresponding pair slot will briefly blink Blue and then all LEDs will go off.+This mode has been designed for situations where you have paired with hosts that are in different locations and want to seamlessly transition from one host to the other when in range.  A good example of this is a work PC and a home PC.  If you pair the Twiddler with both, when you leave home, the pair is dropped when out of range of your Home PC and automatically paired when you get into range of your work PC.
  
-==Specific Pairing Slot== +Press the [[t4_specialchords|Cycle Bluetooth Pairs]] chord until at least one of the LEDs is Aqua (light blue). This mode will only seek to pair with known hosts.  The number of known hosts are represented by Blue LEDs and empty pair slots are represented by Aqua LEDs.  All three LEDs will illuminate then cycle left to right, then right to left indicating that it is searching for a match. Once a match is found, the corresponding pair slot will briefly blink Blue and then all LEDs will go off. 
-B-- + 
--B- + 
---B+==Specific Pairing Slot (B--, -B-, --B)==
  
 To cycle to a specific pair slot press the [[t4_specialchords|Cycle Bluetooth Pairs]] chord until the 1 Blue LED illuminates in the 1st (left most) position. Pressing the Cycle Bluetooth Pairs chord again will advance the selection to the next pair slot, if it has been previously assigned. To cycle to a specific pair slot press the [[t4_specialchords|Cycle Bluetooth Pairs]] chord until the 1 Blue LED illuminates in the 1st (left most) position. Pressing the Cycle Bluetooth Pairs chord again will advance the selection to the next pair slot, if it has been previously assigned.
  
-==Bonding== +==Bonding (B-B)==
-B-B+
  
 When a host is in the process of pairing, the Twiddler goes through a bonding phase.  You will see LED 1 and LED 3 briefly illuminate to indicate this. When a host is in the process of pairing, the Twiddler goes through a bonding phase.  You will see LED 1 and LED 3 briefly illuminate to indicate this.
Line 58: Line 57:
 Use the same procedure to add a third host to your Twiddler. Use the same procedure to add a third host to your Twiddler.
 The right most LED will be illuminated Blue when paired. The right most LED will be illuminated Blue when paired.
- 
-===== Automatic Discovery Mode ==== 
- 
-Automatic Discovery Mode will pair with any of the hosts in your pair table. To enter this mode press the [[t4_specialchords|Cycle Bluetooth Pairs Chord]] until all 3 LEDs light up.  The Twiddler 4 will be actively scanning for hosts.  This mode has been designed for situations where you have paired with hosts that are in different locations and want to seamlessly transition from one host to the other when in range.  A good example of this is a work PC and a home PC.  If you pair the Twiddler with both, when you leave home, the pair is dropped when out of range of your Home PC and automatically paired when you get into range of your work PC. 
  
 ===== Rearranging the host order ===== ===== Rearranging the host order =====
t4_bluetooth.1748280779.txt.gz · Last modified: by tony

Page Tools