Differences

This shows you the differences between two versions of the page.

--- stickykeys [2025/04/15 17:09] – tony
+++ stickykeys [2025/06/30 16:26] (current) – eric
@@ Line 2: / Line 2: @@
 **IN DEVELOPMENT FOR TWIDDLER 4** \\
-In some situations, holding down T1/Num, T2/Alt, T3/Ctrl or T4/Shift while typing is not desirable.  The Sticky Key mode allows T1/Num to act as Num Lock and T4/Shift to act as Caps Lock.
+In some situations, holding down some thumb buttons such as modifiers for Alt(T2), Ctrl(T3), or Shift(T4) while pressing finger buttons is not desirable.  The Sticky Key feature mode allows the user to virtually hold down the button by just tapping the button to toggle it as "pressed" or "released".
-When enabled, simply tap the Sticky Key and it will remain on until tapped again.  Holding the key, will also toggle it until it is tapped or held again.  Both T1/Num and T4/Shift can be enabled and toggled to the ON/OFF positions at the same time.
+When enabled, simply tap the Sticky button and it will virtually remain on until tapped again.  Multiple sticky buttons can be enabled and toggled independently and used at the same time.
-For chord notation, when a Sticky Key is toggled into the ON state, the chords will always have that modifier associated with it.
+For chord notation, when a Sticky Key is toggled into the ON state, that button will be automatically included when pressing and releasing other buttons to find a matching chord in your config.
-For example, if Num Lock is toggled on, using the default config:
+For example, if T1 is set as sticky and is toggled on, using the default config:
 //T4 Notation//
@@ Line 15: / Line 15: @@
 //Classic Notation//
   * pressing 0 R000 ("a") will send N R000 ("1").
+  *
 ====Enabling the Sticky Feature====
 By default, Sticky Keys are disabled.  To enable them:

Twiddler

User Tools

Site Tools

Differences

Page Tools