Differences

This shows you the differences between two versions of the page.

--- specialchords [2015/05/20 20:00] – tony
+++ specialchords [2024/05/03 17:21] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== Special Chords =====
+===== Reserved Chords =====
-There are a few special chords in the Twiddler3.  They are used to perform some testing and debugging as well as feature enhancements.
+There are a few reserved chords in the Twiddler 3.  They are used to perform some testing and debugging as well as feature enhancements.
 ^ Chord ^ Action ^
+| N+S 0000 | Hold during power up.  Runs factory boot code (x.xxb) so that [[firmwareupgrade|firmware can be updated]]|
 | N+S R000 | Reset the Bluetooth Pairing |
 | N+S 0R00 | Print the Firmware Version |
@@ Line 9: / Line 10: @@
 | N+S 000R | Program Flash memory from twiddler.hex |
 | N+S M000 | Load factory Default Chord map until next power cycle |
-| N+S 0M00 | Print Battery Status (Range: vcc=96=3.3v (100% charge), vcc=114=2.8v (0% charge))|
+| N+S 0M00 | Print Battery Status (Range: vcc=96=3.7v (100% charge), vcc=114=2.8v (0% charge))(Bluetooth connection only)|
-| N+S 0000 | Hold during power up.  Runs factory boot code (x.xxb) so that firmware can be updated|
+| N+S 00M0 | Toggle untethered-recording mode [[twiddler_firmware|(v0.12+ firmware)]]|
+| N+S 000M | Print recorded data [[twiddler_firmware|(v0.12+ firmware)]]|

Twiddler